Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Bloomington, CA
Chimney repair in Bloomington often comes down to one thing: wind damage and deferred maintenance on older masonry. Our crews see mid-century ranch homes and manufactured homes where flues have gone uncapped for years, and the Santa Ana season tears through every fall with palm fronds, dust, and tumbleweed. Mayflower Chimney Sweep handles the full range of chimney repair in Bloomington, from crown rebuilds to liner work, plus sweeping and dryer vent cleaning. Call (877) 819-0285 when you need a straight answer about what your chimney actually needs.
Why Bloomington Homes Are Different
Bloomington sits in the Inland Empire’s wind corridor, and that changes chimney work in ways people don’t expect until they see it. The Santa Ana winds that blow through each fall don’t just cool things down, they carry grit, palm fronds, and dry tumbleweed across this semi-rural, equestrian-leaning community. East-facing chimney caps catch the worst of it. We regularly pull screens in Bloomington that are packed solid after a single windstorm, and that trapped debris becomes a fire hazard the next time someone lights a fire.
The housing stock here compounds the issue. Bloomington is a mix of mid-century ranch-style homes and manufactured homes on generous lots, many with original masonry fireplaces that were built before modern cap standards existed. A large share of those flues are uncapped or undersized. Renter-occupied properties often go years between inspections, which means creosote and structural damage have more time to settle in. Unlike Fontana or Rialto, where tighter lots and newer builds dominate, Bloomington still has plenty of properties burning wood and running outdoor fire pits year-round. That’s not a seasonal pattern. It’s a continuous one, and it means creosote buildup is a genuine concern in July as much as in January.
Styles & brands we work with
Our Main Bloomington Services
Bloomington homeowners call us most often for two jobs: cleaning what the wind and wood smoke leave behind, and clearing dryer vents that most people forget are fire risks. Here’s how each works in this area.
Chimney Sweep in Bloomington
A sweep in Bloomington is less about winter heating and more about clearing what the Santa Ana winds push into the flue. Palm fronds, dust, and tumbleweed find their way into uncapped chimneys on a regular basis, and creosote from year-round wood burning and outdoor fire pits builds up faster than most homeowners realize. We inspect as we clean, so if we find a cracked flue tile or a damaged cap while sweeping, we tell you about it in plain language before we touch anything. Full details are on our dedicated page: Chimney Sweep in Bloomington.
Dryer Vent Cleaning in Bloomington
Dryer vents are chimneys too, and in Bloomington’s dusty, windy conditions, they clog faster than in coastal areas. Lint combined with inland dust creates a dense blockage that restricts airflow and raises the fire risk inside the vent run. Homes on larger lots often have longer vent runs to the exterior, which means more surface area for lint to collect. We clean the entire run from the dryer to the exterior termination point. Learn more here: Dryer Vent Cleaning in Bloomington.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Bloomington
Chimney repair in Bloomington usually starts with a call about something small, a loose cap rattling in the wind or water staining on the ceiling near the fireplace, and then we find the full picture. Older masonry fireplaces in this area were often built without proper caps, and decades of Santa Ana wind, dry heat, and occasional rain have taken their toll on crowns, flashing, and flue liners. We stock and install materials from DuraFlex, Olympia Chimney, and Copperfield, so when a repair is needed, we’re not ordering unknown-source parts and hoping they fit. You can see how we approach the full scope of this work on our Chimney Repair page.
Chimney Crown Repair
Signs you need it
Hairline cracks in the crown let water seep into the chimney structure, and in Bloomington you’ll often see the damage show up as spalling brick or a rusted damper after a rainy season.
What it costs in Bloomington
A chimney crown repair in Bloomington typically runs $300 to $750, depending on whether we’re sealing minor cracks or rebuilding the crown entirely.
How we do it
We clean the crown surface, fill or remove the damaged material, then apply a new crown or sealant that’s pitched to shed water away from the flue.
Chimney Cap Installation
Signs you need it
If birds, palm fronds, or rain are getting into your flue, or if you can see that the existing cap is rusted through or missing entirely, a new cap is the fix.
What it costs in Bloomington
Chimney cap installation in Bloomington typically ranges from $150 to $450 for the cap and mounting, depending on flue size and whether custom sizing is required.
How we do it
We measure the flue, select a cap that fits the tile or pipe diameter, and secure it with mechanical fasteners so it won’t lift off in Santa Ana winds.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the fireplace or damp drywall around the chimney chase usually mean the flashing where the chimney meets the roof has failed.
What it costs in Bloomington
Flashing repair in Bloomington generally costs $200 to $500, depending on whether we’re resealing a small section or replacing the full flashing around the chimney base.
How we do it
We remove the old flashing, inspect the underlayment for rot, then install new step and counter flashing sealed with a weatherproof membrane rated for Inland Empire sun.
What Chimney Repair Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Chimney crown repair | $300 – $750 |
| Chimney cap installation | $150 – $450 |
| Chimney flashing repair | $200 – $500 |
What pushes prices up in Bloomington is access. Homes on larger lots sometimes mean longer ladder runs or roof pitches that require extra setup, and flues that haven’t been inspected in years often need more prep work before we can do the repair itself. We give you a flat price before we start, and we don’t change it once the work begins.
Do I need a new liner if my chimney is old?
Not necessarily. Age alone doesn’t mean a liner has failed. We inspect with a camera and show you what we see. If the clay tiles are intact and sized correctly, you may just need a sweep. If there are cracks, gaps, or the liner is undersized for the appliance, then a new liner is the right call, and we’ll show you the footage before recommending anything.
Can you fix a chimney cap the same visit as a sweep?
Yes. If we find a damaged cap during a sweep in Bloomington, we can usually replace it on the spot. Our trucks carry caps in common flue sizes, and if a custom size is needed, we schedule the follow-up before we leave. Call (877) 819-0285 to book a sweep and inspection together.
Brands We Service in Bloomington
Mayflower Chimney Sweep stocks and installs components from DuraFlex, Olympia Chimney, and Copperfield, brands that chimney professionals across the country recognize and specify. That means a liner or cap we install in Bloomington has a verifiable name behind it, and we can tell you exactly what went into your chimney. Parts are stocked on our trucks for common jobs, so most repairs don’t wait on shipping. See more on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney inspection | $120 – $280 |
| Chimney crown repair | $300 – $750 |
| Chimney cap installation | $150 – $450 |
| Chimney cap replacement | $200 – $500 |
| Chimney liner installation | $1,500 – $4,000 |
| Chimney flashing repair | $200 – $500 |
| Dryer vent cleaning | $100 – $220 |
In Bloomington, prices tend to rise when a chimney hasn’t been swept in several years (more creosote to remove), when the cap is packed with wind-blown debris that needs clearing before work begins, or when a manufactured home’s venting requires specialized fittings. Whatever the job, you’ll get a flat price before the work starts, and that’s the price you pay.
Neighborhoods We Serve in Bloomington
We work across all of Bloomington’s 92316 ZIP code, from the older ranch-style streets near Valley Boulevard to the larger equestrian properties on the community’s edges. The area’s layout, with its mix of mid-century homes and manufactured housing on generous lots, means we plan our routing to cover the whole community in a single day when possible.
- West Bloomington near Cedar Avenue
- East Bloomington along the Santa Ana River corridor
- South Bloomington near Slover Avenue
- North Bloomington near the 10 Freeway
- The equestrian properties east of Ayala Drive
Service Area – Cities Near Bloomington
Mayflower Chimney Sweep serves Bloomington and the surrounding Inland Empire communities. If you’re in a neighboring city, we cover those same services there: Fontana, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA are all within our regular service area.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Bloomington
We schedule most Bloomington chimney jobs within a week, and we batch calls in the 92316 ZIP code to keep drive time down. During Santa Ana season, when caps clog and debris calls spike, we add extra Bloomington days to our schedule. Call (877) 819-0285 to see what’s available this week.
In most cases, no. Repairs like cap replacement, crown sealing, flashing work, and relining within an existing flue don’t require a permit in Bloomington. Structural rebuilds above the roofline can trigger permit requirements, and we’ll tell you if your job falls into that category before we start.
Yes. A large share of Bloomington homes are manufactured or mobile, and their venting systems are different from masonry fireplaces. We inspect, sweep, and repair those systems with components sized to the specific appliance, not adapted from standard masonry parts. The venting on manufactured homes often needs more frequent inspection because the clearances are tighter.
If your chimney needs a sweep, a repair, or a straight answer about what’s going on up there, call Mayflower Chimney Sweep at (877) 819-0285 for a free estimate. We serve Bloomington and the surrounding Inland Empire, and we’ll tell you what we find before we touch anything.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Sofia Morales"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Priya Rao"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Renee Doyle