Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Irvine, CA
Chimney repair in Irvine runs into two things most companies don’t expect: tract housing built in planned villages, and fireplaces that hardly ever see a real fire. When a chimney fails here, it’s rarely from heavy creosote. More often it’s a prefab unit that’s rusted through, a cap that never fit right, or a gas fireplace the original builder installed and nobody has inspected since. Mayflower Chimney Sweep has served Irvine since 2013. We handle repair, relining, and everything between the firebox and the cap. Call (877) 819-0285 and we’ll tell you what’s actually wrong.
Why Irvine Homes Are Different
Irvine isn’t like older Southern California cities with a hundred years of housing stock piled up. Most homes here went up between the 1970s and the 2000s, built by the Irvine Company as part of master-planned villages. Woodbridge, Northwood, Turtle Rock, Westpark: these neighborhoods share a pattern. Two-story stucco construction, masonry or prefab fireplaces, and a growing number of gas units in newer construction. That pattern matters when something goes wrong. A prefab fireplace has a metal flue with a twenty-to-thirty-year service life, and a lot of Irvine homes are now right in that window. The climate also does something specific here. Mild winters and warm, dry air mean fireplaces get occasional use on cool evenings, which produces light creosote rather than the heavy soot you’d see in a cold-climate town. But the dry brushfire-prone surroundings make spark arrestor condition a real concern, not a formality. Add in the HOA layer: many villages have architectural review rules that affect what can be changed on a roofline, and a technician often has to coordinate with homeowners before modifying caps or exterior flues. And a surprising number of Irvine chimneys that were never used at all turn out to have birds, animals, or debris sitting in the flue from years of being idle.
Styles & brands we work with
Our Main Irvine Services
Most Irvine homeowners call us for one of two things: a chimney sweep they’ve been putting off, or a dryer vent that’s never been cleaned since the house was built. Here’s what each job looks like in Irvine.
Chimney Sweep in Irvine
An Irvine sweep is rarely about heavy soot. In this climate, fireplaces get used on cool evenings and produce light creosote, but the real find is often something else: a bird nest in an idle flue, a missing spark arrestor, or a gas fireplace that needs its logs and burners cleaned and inspected. We sweep the flue, remove debris, and inspect the system end to end. If we find damage during the sweep, we can quote the repair right then, because we do repair work ourselves. Get the details on our Chimney Sweep in Irvine page.
Dryer Vent Cleaning in Irvine
Dryer vents are chimneys too, and in Irvine’s dry air a lint-clogged vent is a house fire waiting for one hot laundry day. Many Irvine homes have laundry rooms on the second floor with long vent runs through walls, which collect lint faster than short first-floor runs. We clean the full vent path, from the dryer connection to the exterior flap, and we check the flap itself for proper closure. Read more on our Dryer Vent Cleaning in Irvine page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Irvine
Most chimney repair calls in Irvine come from homes built between 1985 and 2005. These are prefab and masonry fireplaces that have spent thirty years in warm, dry air, and the failures we see most are rusted metal caps, cracked crowns, worn flashing, and flue liners that are no longer doing their job. A gas fireplace that was never serviced can hide a damaged liner just as easily as a wood-burning unit. We repair what we find, and we use named materials you can research yourself: HeatShield sealant for liner repair, DuraFlex liners for relining, and Copperfield chimney components. Our full-service capability is why we handle the most common Irvine repair jobs without sending you to a subcontractor. Learn more about the scope of this work at our Chimney Repair hub.
Chimney Cap Installation
Signs you need it
Your chimney has no cap, or the existing cap is rusted through, loose, or missing entirely, leaving the flue open to rain and birds.
What it costs in Irvine
A new cap typically runs $300 to $700 in Irvine depending on the flue size and whether a custom fit is required.
How we do it
We measure the flue, select a stainless or copper cap from Copperfield or Olympia Chimney, and secure it properly so it actually stays put in Irvine’s Santa Ana winds.
Chimney Cap Replacement
Signs you need it
The existing cap has rust holes, dented mesh, a broken spark arrestor, or you can see water stains inside the firebox after rain.
What it costs in Irvine
Chimney cap replacement in Irvine is typically $350 to $800, with the upper end for custom or copper caps.
How we do it
We remove the old cap, check the flue opening for any hidden damage, and install a replacement from Copperfield or Famco sized to your flue.
Chimney Liner Installation
Signs you need it
Your inspection shows cracked clay tiles, missing mortar joints, or a gas appliance venting into a flue that was never designed for it.
What it costs in Irvine
A stainless liner installation for a typical Irvine single-flue chimney runs $2,200 to $5,000 depending on flue height and access.
How we do it
We size the liner to the appliance and flue, install a DuraFlex stainless system, and verify the full path from appliance to cap.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, damp drywall, or the metal flashing around the roofline is pulling away from the brick or stucco.
What it costs in Irvine
Flashing repair in Irvine generally falls between $350 and $900, depending on whether the flashing can be resealed or needs full replacement.
How we do it
We inspect the flashing joint where chimney meets roof, remove failed sealant, and install new metal flashing with a proper weatherproof seal.
Chimney Crown Repair
Signs you need it
The concrete crown on top of your chimney has visible cracks, spalling, or pieces missing, which lets water seep into the masonry below.
What it costs in Irvine
Crown repair in Irvine runs $400 to $1,200, with the upper range for full crown rebuilds.
How we do it
We clean the damaged surface, fill cracks with a weather-resistant sealant, and resurface the crown so water drains away from the flue instead of into it.
What Chimney Repair Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Chimney cap installation | $300 to $700 |
| Chimney cap replacement | $350 to $800 |
| Chimney crown repair | $400 to $1,200 |
| Chimney flashing repair | $350 to $900 |
What pushes prices up in Irvine is typically access: two-story rooflines, steep pitches in neighborhoods like Turtle Rock, or HOA requirements that slow down approval for visible changes. We give an upfront price before any work begins, so you’re not surprised when the invoice arrives.
Can a damaged chimney liner be repaired instead of replaced in Irvine?
Yes. If the damage is limited to minor cracks or gaps, HeatShield repair can often restore the liner without a full replacement. We’ll show you camera footage of the liner condition before recommending either option.
Do Irvine HOAs affect chimney repair work?
Some do. If your village’s architectural rules restrict roofline changes, we’ll tell you what needs review before you schedule. We’ve worked in enough Irvine villages to know which repairs usually sail through and which need advance notice.
Brands We Service in Irvine
We stock and install parts from brands you can look up yourself: DuraFlex liners, HeatShield sealant, Olympia Chimney caps, and Famco components. Because we carry these locally, most common Irvine repairs don’t wait on parts shipped from out of state. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Chimney cap installation | $300 to $700 |
| Chimney cap replacement | $350 to $800 |
| Chimney crown repair | $400 to $1,200 |
| Chimney flashing repair | $350 to $900 |
| Chimney liner installation | $2,200 to $5,000 |
| Standard chimney sweep | $139 to $249 |
| Dryer vent cleaning | $99 to $179 |
Irvine pricing gets pushed up by two things: multi-story rooflines that need more ladder work, and HOA review requirements that can add lead time to visible exterior changes. But the price we quote upfront is the price you pay. No add-ons after the fact.
Neighborhoods We Serve in Irvine
We work across Irvine’s villages, and we know the housing stock in each one well enough to predict what we’ll likely find before we arrive. Most Irvine calls are within a same-week window, and we cover all four Irvine ZIP codes: 92617, 92618, 92619, and 92620.
- Woodbridge
- Northwood
- Turtle Rock
- Westpark
- University Park
Service Area – Cities Near Irvine
Our service area extends beyond Irvine into the surrounding South Orange County cities. If you’re in Tustin, CA, Aliso Viejo, CA, Santa Ana, CA, or North Tustin, CA, we cover those too. Same technicians, same upfront pricing, same named brands.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Irvine
Most Irvine appointments get scheduled within the same week. We run regular routes through the Irvine villages, so we can often fit you in faster if the issue is urgent, like water coming through the chimney during a rare rainstorm.
Sometimes. If your village’s architectural review covers roofline components, a cap change may need sign-off. We’ll tell you what’s visible from the street and whether approval is likely required, so you can start that process before we schedule.
We cover all four Irvine ZIP codes: 92617, 92618, 92619, and 92620. If you’re in any Irvine village within those codes, you’re in our service area and can book directly at (877) 819-0285.
Phone: (877) 819-0285. Mayflower Chimney Sweep serves Irvine from our Murrieta base, with full chimney repair, relining, sweeping, and dryer vent cleaning under one roof. Tell us what you’re seeing and we’ll give you the straight answer.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Priya Rao"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Renee Doyle"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Kurt Walsh